Rough Boulder Opal

!

RP00208

Description
 
A semi finished piece of Koroit material.
Not lots of fire...  just a great pattern. 
Total Weight:
approx 30gms
Mined From:
 
Koroit

KYC00005

Shape
 
Freeform
Category
 
Boulder Opal
Description
 
A 1/2 piece Koroit opal nut.
The rough piece has been roughly cut / semi polished to show the pattern.
This piece can be cut up for a few stones or finished as a specimen.
Weight:
approx 23 gms
Dimensions:
 
43mm x 24mm
Thickness:
 
8mm
Mined From:
 
Koroit

KYC00001

Shape
 
Freeform
Category
 
Boulder Opal
Description
 

A quarter piece of a Koroit opal nut.
The rough piece has been roughly polished to show the pattern.
This piece can be cut up for a few stones or finished as a specimen.

Weight:
approx 54 gms
Dimensions:
 
36mm x 40mm
Thickness:
 
17mm
Mined From:
 
Koroit

RP00212

Shape
random
Category
Rough from Koroit / Yowah
Description

The stone /nut has been cut through roughly the center.
I
t is approx. over 12mm thick so there is plenty of meat to support the stone if you want to cut this.

I think it is a nice specimen just as it is
although it has had a rough polish on the faces which DOES need re- doing
.
The opal that you can see is all that is there . In the surrounding halo there is just a pretty pattern
The photo is a fair representation of the piece you are buying


front face


Back

Weight:
Over 75gms
Dimensions:
Each stone Approx. 45 m from the flat to the outside
Thickness:
12 mm
Mined From:
Koroit

RP00213

Shape
random
Category
Rough from Koroit / Yowah
Description

The stone has been sliced down through the middle.
This has been rough polished on the face and it does need re-polishing.

How ever it is has been sawn off centre and in doing this has made a thick and a thin piece
On the thick side you may get another small stone.

Weight:
Over 5 gms
Dimensions:
Over 30 mm wide and over 40mm long
Thickness:
Varies
Mined From:
Koroit

RP00210

Shape
Free form
Category
Rough from Koroit / Yowah
Description

I would like to sell these three stones together.
They would make three lovely pendants or brooches for three lovely sisters.

These have been roughly shaped and are of very hard stone with few pin holes which this material is prone to.
They are all gem guality
The last stone does have some only the one face which will become the back .
These have been roughly polished but do need to be finished shaping and polished properly.

Please refert the pictures below

Weight:
Stone 1=17.5gms
Stone 2=13.5gms
Stone 3=17.5gms All aproximate only
Dimensions:
Stone 1=50x30 mm
Stone 2=48x35 mm
Stone 3= 45x 40 mm
All aproximate only on longst pionts
Thickness:
6mm and over
Mined From:
Koroit
   

Stone 1


   

Stone 2



   
Stone 3